July 23, 2022 By author

Types of Metals That Can Be Cut With a Metal Laser Cutter

metal laser cutter

Metal laser cutters can be used for various kinds of cutting. Among the different types, the cylindrical type is more popular due to its high efficiency and low price. However, there are a few types that are not popular. If you are planning to buy one, you should read the following articles for more information. Listed below are the types of metals that can be cut with a laser cutter. These types of machines have various benefits.

Cost

Before deciding on the type of https://www.hmlasercutter.com/ that will work best for your needs, you must determine the materials to be worked with. Thicker or more durable materials may require waterjet cutting. The final costs of laser cutting services are also affected by the number of layers and overall weight of the workpiece. For high-volume orders, you won’t have to worry about laser warm-up time since it’s included in the overall price. Other factors that will determine the cost of a https://www.angelo-home.com/product/modern-high-gloss-white-kitchen-cabinet-design/ include logistics and shipping. For instance, shipping prices depend on the volume and overall weight of the product, the supplier’s location, and regulations.

Types

The type of metal laser cutter you choose will determine what it can cut. Several different types are available. These include fiber lasers and crystal lasers. Both types of lasers can be used to cut metal and non-metal materials. Crystal lasers are more expensive and have shorter life cycles than fiber lasers, which generate a beam of light using a series of laser diodes. The beam is then focused on the workpiece.

Maintenance

The basic steps to maintain the machine include checking the cutting gas, water, and the laser tube. This will help to prevent overheating. When it comes to replacing the water, you can simply use a soft brush or compressed air to clean the tube. If necessary, you can replace the cooling water or add more in time. It is also important to check the zero point and tighten the Y-axis mounting screws and Z-axis mounting block.

Various metals that can be cut by laser cutters

Stainless steel can be a challenge to laser cut because it reacts with oxygen, which can create an impurity layer on the surface. Because of this, stainless steel is primarily laser-cut with a non-reactive gas such as nitrogen. Stainless steel requires a significantly lower cutting thickness than mild steel, which is the most common type of steel in industry. Another metal that can be laser-cut is aluminum, which is highly reactive and oxidizes quickly when exposed to the elements. It needs a non-reactive gas such as nitrogen in order to be laser-cuttable, and the cutting thickness of aluminum must be halved for this material.

Cost of CO2 laser cutters

When it comes to price, CO2 laser cutters are far more expensive than fiber lasers. They tend to have less powerful beams, but can still perform some basic tasks. Although CO2 lasers are more powerful than fiber lasers, they are more expensive to buy and operate. Because of the gasses and consumables they use, CO2 machines tend to have higher power costs. Each system has its own set of strengths and disadvantages, but both have a compelling argument for cutting metal.